ZMM C 11 T6

•  
  Numéro de référence 1069-2353

  Heures de fonctionnement non renseigné

• Offreur

  HESSE + CO Maschinenfabrik GesmbH
  Industriezentrum NÖ-Süd, Straße 4 Objekt 8
  2351 Wiener Neudorf

  Austria

  

• Catégorie principale

  Machines pour le travail du métal

• Catégorie

  Tours d'usinage

• Type de machine

  Tours à broches de guidage et de traction

• Fabricant

  ZMM

• Données techniques

  neu

  ca. 4 Monate ab Auftragse

  Bulgarien

  70260 €

  1412.23 €

  730 mm

  2000 mm

  365 mm

  155 mm

  500 mm

  400 mm

  160 M

  12

  16 - 800 1/min

  152

  0.039 - 9 mm/U

  0.02 - 4.5 mm/U

  76

  0.5 - 90 mm

  60 - 1/3 Gänge/"

  0.125 - 22.5

  240 - 1 1/3

  390 mm

  130 mm

  90 mm

  5 MK

  225 mm

  11 kW

• Description

  Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3204 Dm. 500 mm on both sides of the spindle, gripping range with outside jaws - 20 -235 mm 2 pcs. steady rests on supports Dm. 15 - 200 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock with quick release Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 155 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• État

  Utilisé