CMX 600 V (Reference-Nr. 065354)

•  
  Numéro de référence 065354

  Année de construction 2024

  Heures de fonctionnement non renseigné

• Offreur

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Catégorie principale

  Machines pour le travail du métal

• Catégorie

  Centres d'usinage

• Type de machine

  Centres d'usinage (verticaux)

• Fabricant

  DMG MORI

• Commande

  Siemens

• Description

  
  

  General
  Vertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control
  Characteristics
  Table surface	900 x 560 mm
  Dimensions (L x W x H)	3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) m
  Rapid feed X / Y / Z	30/30/30 m/min
  Movement X / Y / Z	600/560/510 mm
  Spindle taper	SK 40 DIN 69871
  Tool Magazine with	60 Positions
  Max. torque	82 Nm
  Torque (100% DC)	54 Nm
  Drive power (40% DC)	13 kW
  Drive power (100% DC)	9 kW
  Speed max.	12000 rpm
  Maximum load (table centre)	600 Kg
  Weight approx.	5300 Kg

• Spécification

  
  

  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  DMG MORI IoTconnector	IoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the h
  Production Package 40 bar	Production Package 40 bar Option includes: - Internal coolant supply 40 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarf
  Renishaw Touch Probe-Kit for SIEMENS control	Renishaw Touch Probe-Kit for SIEMENS control Option includes: - PP40 touch probe with optical signal transmission; - OTS probe for tool measurement; - Calibration tool; - Calibration ring; - Case for equipment.
  NC-Divider EA 510.L indirect (Siemens)	NC rotary table (4th axis) Lehmann with indirect measuring system Option includes: - Rotary table type EA-510.L - Electrical and pneumatic preparation - Software preparation to work with rotary table - Cycle TRACYL which allows to define contour on the
  Table plate d200mm x35 mm Lehmann EA410/510	Faceplate diameter 200 mm for NC rotary table Lehmann EA-510.L 4 T-Slots 12 mm
  Preparation for oil-mist extractor unit	Preparation for Oil-Mist Extractor Unit Option includes only mechanical preparation Opening diameter: D150 mm
  Roto clear with multilayer window	Roto Clear - view window with multilayer window with tempered glass
  Air coolant internal (through spindle centre)	Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
  Tropical Package	Tropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Option available for standard spindle Recommended from 35°C to max. 45°C environmental temperature
  Tool Magazine 60 places	Tool Magazine 60 places SK40 Option includes: - Tool magazine 60 places with double gripper; chain type, servo drive - Tool (Un-) Loading through Magazine Door during AUTO Mode - Tool magazine door - Automatic magazine shutter (instead of brushes
  Tool clamping buttons on the headstock	Tool Clamping and Unclamping Buttons placed on the Headstock Cover
  Technology cycle MPC 2.0	Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For SIEMENS control
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b

• État

  Utilisé