DMU 100 monoBLOCK (Reference-Nr. 011191)

•  
  Numéro de référence 011191

  Année de construction 2013

  Heures de fonctionnement non renseigné

• Offreur

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Catégorie principale

  Machines pour le travail du métal

• Catégorie

  Centres d'usinage

• Type de machine

  Centres d'usinage (universels)

• Fabricant

  DMG MORI

• Commande

  Heidenhain

• Description

  
  

  General
  Universal milling machine in monoBLOCK construction; Control: 3D Control Heidenhain iTNC 530 HSCI
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min
  Working area 1
  Longitudinal	1150 mm
  Cross	710 mm
  Vertical	710 mm
  Tool changer
  Application	Vertical
  Tool changer plane	vertical
  Type of gripper	Pick up
  Number of tools	32
  Miscellaneous
  Clamping System	HSK-A 63
  Floor space/Weight
  Dimensions (L x W x H)	6,0 x 5,0 x 2,7 (7,0 x 5,5 x 3,5) m
  Weight approx.	10700 Kg

• Spécification

  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC rotary table integrated in rigid table	Type of Measuring system Direct measuring system
  Motor spindle 10,000 rpm	Motor spindle SK 40 10,000 rpm
  	4. Axes (swivelling range) +/- 360/000,1 degree
  	Rotation speed max.4. Axis 30 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 11
  	Slot width 14 mm
  	Maximum load (table centre) 800 Kg
  	Centre bore 50 mm
  	Table surface 1500 x 800 (Ø 800) mm
  Controlled NC swivel milling head (B-axis)	Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Spindle offset 100 mm / 4 in Swivel range -120°/+30° Traverse range X-axis reduced by 100 mm / 4 in
  	Spindle taper SK 40 DIN 69871
  	Speed range - 10000 rpm
  	Torque (40% DC) 285 Nm
  	Torque (100% DC) 190 Nm
  	Drive power (40% DC) 30 kW
  	Drive power (100% DC) 20 kW
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine)
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Production package 40bar/23l/min	Production package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 600 l / 160 gallon, paper band filter, rotating clear-view window, chip rinsing in cabin door, coolant through spindle centre (AD)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Oil and emulsion mist separator	Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  Special equipment	RMS-Sensor

• État

  Utilisé